Application

Suitable for fabricating elbow, tee, cross and Y shape(45°and 60°) fittings of PE,PP, PVDF in workshop.

Features

Applied to fabricate PE PP PVDF elbow, tee, cross and Y shape (45° and 60°)

Fitting in workshop. Also used to lengthen the injection moulded fitting and make an integrated fitting.

Integrated structure. Nothing remains but to choose the different special clamps while fabricating different fitting

Removing PTEF coated heating plate with separate temperature controlling system.

Electric planning tool with safety limit switch enable to start it only when it is locked in the operation position.

Low starting pressure and high reliable seal structure.

Separate two-channel timer record times in soaking and cooling phase.

Digital pressure meter enable to control pressure accurately.

Linear guide ways are equipped with eating plate, planning tool and dragging plate.

Products comply with 98/37/EC and 73/23/EEC standards.

Technical specifications

◆ Ranges of tee: 630mm－1000mm

(630mm-710mm-800mm-900mm-1000mm)

◆ Ranges of cross: 630mm－1000mm

(630mm-710mm-800mm-900mm-1000mm)

Ranges of elbow (n×11.25°): 630mm－1000mm

(630mm-710mm-800mm-900mm-1000mm)

Ranges of application: PE, PP and PVDF

Working voltage: ～380V ±10%, 50Hz

Total power: 47.28kW, including: planing tool motor: 4 kW, heating plate: 39.28 kW, hydraulic unit motor: 4kW

PTFE coated heating plate, high accuracy temperature controller, difference in heating plate surface temperature ≤±5°; PLC control system;

Environment temperature: －10° ～45°

Electronic count-down timer for heating and cooling time.

Whole machine consists of four parts: basic frame (including: heating plate, planing tool, and hydraulic system), elbow clamps, tee clamps, and cross clamps

ACCESSORIES LIST

No	Name	Unit	Qty	Remark
1	Main machine	set	1
2	Electrical control box	set	1
3	Tee clamps (inserts included)	set	1	Spec: Φ630~Φ900
4	Elbow clamps (inserts included)	set	1	Spec: Φ630~Φ900
5	Screws for main clamp	set	1	Outer hexagonal screw: M16 ×110 8pcs M16 ×90 10pcs
6	Elbow main clamp locking plate	pcs	4
Accessories with machine
1	Hammer	pcs	1
2	Screws for inserts	set	1
3	Special location handle	pcs	1
4	Spare blade	pcs	2
5	Location pin	pcs	6	4 short 2 long
6	24mm box wrench	set	1
7	inner hex wrench	set	1	Spec: 4~14
8	250mm adjustable spanner	pcs	1
9	24mmcombination spanner	pcs	1
10	Open end wrench	pcs	1	Spec: 32~36
11	cross screw driver	pcs	1	Spec: 150mm, 250mm
12	Warranty card	pcs	1
13	Operation manual	pcs	1
14	Adjustment cushion	set	8
15	Planing limit box	pcs	1

PACKING LIST

Item	Dimension with packing（mm）	N.W（kg）	G.W（kg）	Remark
1	3200×2500×1900	9000	9990	Basic frame
2	920×720×1110	400	500	Hydraulic unit
3	1500×1450×1450	3000	3800	Elbow clamps
4	2040×2000×1500	5000	5900	Cross clamps
5	820×670×1150	100	150	Electric box
Total	25.9CBM	17500	20340