Knowledge

1. Convenience of transportation of pe electric welding machine Since the electric fusion welding machine is mainly used for on-site construction, it must be moved around. Of cours

1. Load the slips consistent with the pipe specifications into the rack; 2. Prepare enough supports to ensure that the pipe to be welded can be at the same height as the center lin

Fault 1. After plugging in, the motor of the hydraulic station rotates and a humming sound is heard, but the hydraulic push rod will not move; Solution: first check whether the hyd

1. Product components: 1. Electric heating tape 2. PE glue stick (need to purchase and use) 2. Construction tools and accessories: electric welding machine, stainless steel buckle,

(1) After the polyethylene pipe is welded with a pe hot melt machine, the third-party acceptance should be strengthened, and a certain proportion of the joints should be cut approp

1. Welding power source. Its output power and welding performance should correspond to the welding process to be used, and it is equipped with an interface for connecting to the ma

1. Listen to the sound When the welding current is very high, the Electrofusion welding machine will make a "soft \" sound, just like the water of a big river; when the w

Hot-melt butt welding machine is a special welding equipment that applies hot-melt butt welding technology to weld thermoplastic pipes and fittings. The welding frame of the fusion

The connection interface of the PE hot melt machine for hot fusion butt joint is flat. The method is to heat the two identical connection interfaces with a hot plate to a viscous f