Knowledge

1. The influence of voltage and current fluctuations on the quality of the interface: For the PE electrofusion pipe fittings with qualified quality, the resistance value of the int

In the installation of a pipe network project, the welding method of PE pipe hot-melt welding machine is applied. The diameter of the main water supply pipe is greater than 63mm an

1. Prepare electric fusion welding machine, PE pipes and fittings that need to be welded. 2. Remove the oxide layer on the pierced end of the PE pipe and then pierce it into the el

The automatic electric fusion welding machine is mainly used for welding various plastic pipes and fittings in new construction and reconstruction projects. To avoid the risk of sc

For new or long-term unused electric welding machines, the insulation resistance between the windings and between the windings and the casing is often greatly reduced due to moistu

1. Electrofusion welding machine can perform automatic welding according to parameter settings, humanized large-screen operation panel, portable design, simple operation and easy t

1. The saw blade to be welded should be cut off at any time before welding, and the welding should be carried out immediately after cutting, so as to avoid the oxidation of the wel

From the way of operation: 1. Fully automatic machine, through the prompts of the LCD screen, complete cutting, heating, docking and other work step by step, the operator only need

1. PE tube preheating stage Fix the welding machine tools and both ends of the pipe, and start the welding machine to preheat the ironing board. 2. Heating stage Adjust the tempera