Knowledge

To the top: The reason why the electric control box meter does not display is the damage of the accessories or the disconnection of the line. The method is to check the accessories

1 Difficulty in monitoring fusion welds After the workpiece is welded, in order to ensure that the quality of the fusion welded joint meets the standard, we need to check the quali

The first question about the electric welding machine is that it doesn't power on when it is connected to the power source. Why not power on? That is the problem of the fuse bu

1. Preparation for welding Welding preparation is mainly to check whether the condition of the welding machine meets the working requirements. For example, check whether the fasten

1. Welding method: Ultrasonic vibration transmits the ultrasonic wave to the weldment along with the welding head. Due to the large acoustic resistance at the two weldments, local

1. After connecting the power cord and confirming the input voltage, select the corresponding voltage. 2. Turn on the main power switch, and select the welding time and current acc

1. Use the sixth gear of the fan to heat for 10 to 12 minutes to feed and work, and use the "D" gear or "E" gear for the main engine speed. 2. When the main eng

1. After the preparation work is over, turn on the operating switch, carefully adjust the working current and start welding. 2. For any reason, when the electric welding machine st

One. Product components: 1, electric heating tape 2, PE glue stick (need to purchase and use) Two. Construction tools and accessories: electric welding machine, stainless steel buc