Knowledge

(1) After the polyethylene pipe is welded with a pe hot melt machine, the third-party acceptance should be strengthened, and a certain proportion of the joints should be cut approp

thermofusionmachines PE butt welding machine is a kind of welding process for PE (polyethylene) film. It is used when PE (polyethylene) tape is made or when heat-sealing is perform

Fault 1. After plugging in, the motor of the hydraulic station rotates and a humming sound is heard, but the hydraulic push rod will not move; solution: first check whether the hyd

The first step is to open the frame, insert the milling cutter, and turn the locking knob to fix the milling cutter on the frame. When starting the pump station, it should be carri

1. Connect the power of each part of the pe hot melt machine, and the power supply should be grounded. At the same time, ensure that the surface of the heating plate is clean and f

1. Features of automata: The fully-automatic machine completes tasks such as milling, heating, joining, etc. through the operation of the LCD screen. The operator only needs to con

1. Convenience of transportation of pe electric welding machine Since the electric fusion welding machine is mainly used for on-site construction, it must be moved around. Of cours

1. Product components: 1. Electric heating tape 2. PE glue stick (need to purchase and use) 2. Construction tools and accessories: electric welding machine, stainless steel buckle,

Generally, the pressure of the PE pipe hot melt machine and the welding pipe schedule of the pe hot melt machine are detailed in the factory manual of each pe hot melt machine manu