PE Pipe Butt Fusion Welding Machine

Model	SDD315
pipe size (mm)	160mm-315mm
Heating plate Max temp	250℃
Temp deviation in surface (170-250)	±5℃
Max tolerence of welding joining	0.3mm
Max working pressure hydraulic station	6mpa
working voltage	220V
Working Frequency	50-60HZ
Motor power/voltage of hydraulic station	0.75KW/220V
Power/Voltage of heating plate	3KW/220V
Power/ voltage of planning tool motor	1.1KW/220V
Total power	4.85KW
Gross Weight(kg)	220KG
Net Weight	190KG
Total Volume	0.70m³

315-355

Advantage

	Planning tool It is the tool which clean and smooth the both ends of the pipes before the heating process . With protection device on it. SDD315 butt welding machine is designed for self aligning facer always produces parallel pipe faces.
	Basic frame The basic frame supports and centres the plastic pipes with two fixed and two movable clamps. Using the hydraulic pressure on the system, the two pistons on the carrying metal bars move the clamps forward and backward and supply the necessary movement for the welding process.
	Heating plate The pipe ends will be heated by this heater before the welding process. The setting of the heater will be done by the thermostat on the plates. SDD315 butt welding machine PTFE coated heating element and uniform surface temperature.
	Hydraulic Unit The necessary electric will be transferee! to the heating plate and planning tool by means of this unit and to the main machine by the hydraulic pressure. Good hydrualic system. Keep long time.