①Connect the wires according to the operating requirements of the electric fusion welding machine, and set the electric fusion welding machine to correctly weld the bai parameters, which can be manually or automatically input. To
②After the inspection is correct, start the electric welding machine and enter the welding process. When the welding time is reached, the machine will automatically enter the cooling state. To
③When the pipe is completely cooled, remove the electric welding machine. To
④ Use a plastic pipe cutter or a fine-tooth saw with a cutting guide to cut the pipe, and make the end surface perpendicular to the pipe axis. Use a knife to cut off the burrs on the inner edge, scrape the welding area of the pipe or the socket end, and clean the welding area. To
⑤Use special fixtures to fix the components to be connected as much as possible. The roundness of the pipe should not exceed 1.5% of the outer diameter of the pipe, otherwise it should be calibrated on the corresponding fixture.
When a voltage is applied between the two plates of the capacitor, the capacitor will store charge. The capacitance of a capacitor is numerically equal to the ratio of the amount of charge on one conductive plate to the voltage between the two plates.
