1. Do not touch the mold during operation.
2. Before we use the welded pipe equipment, we must first check whether the lubrication points on the unit are completely lubricated.
3. Daily maintenance must be done well so that the service life will be long.
We must do a good job of anti-rust work whether it is the parts or the complete machine of the fully automatic pipe welding unit. First, try to avoid placing the pipe welding equipment in a humid place. In addition to rust removal grease, we have to carry out strict maintenance work in addition to rust prevention.
The operation of the fully automatic pipe welding unit equipment must strictly follow the formal operating procedures. Before starting the machine, add lubricating oil to the machine regularly, fixedly and quantitatively according to the lubrication chart. The lubricating oil must be clean and free of impurities.
The automatic welded pipe unit regularly replaces the lubricating oil in the bearings, and conducts frequent inspections on electrical appliances to eliminate unreliable safety factors. For the V-belts, handles, knobs and buttons of the automatic pipe welding unit, check whether they are damaged regularly.
The specific butt welding process is:
1. After the coil is positioned properly, the left and right taper heads of the uncoiler can be inserted into the coil and rotate at the same time. The lead is sent to the pinch roller, the upper roller is pressed down, and the steel coil trolley and the magnetic roller can return to their original positions.
2. In order to allow the spring steel belt to run accurately, the uncoiler can move +150mm axially before operation. After the uncoiler is started, the strip passes through the pinch roller to the leveler equipped with dust removal device.
3. The straightened spring steel belt is cut with sliding hydraulic shears on the head and tail of the strip (the strip head can be immediately slid into the waste box when the strip is cut, and the cut strip tail can be collected online with an output device In the special collection box on the outside).
