We need to confirm the brand of the Electrofusion welding machine to be connected, which country it is from, the length of the hot melt hose, and the inner diameter of the hot melt hose. These basic data.
Then, take pictures of the plugs at both ends of the hot melt hose to be replaced to the hot melt glue machine parts manufacturer to confirm whether it is the conventional hot melt hose connection method and the pin connection position, so as to avoid incorrect positions and receive After delivery, it cannot be plugged in and cannot be used.
The next step is to determine whether the hot melt hose is used for strip-shaped or spiral spraying. If it is a strip-shaped hot-melt hose, there is no need to add an extra Teflon air tube, but a spiral hot melt The hose must be added with one more tube. Here, the editor will give everyone a little knowledge. The spiral rubber ring is blown out by the air pressure in the trachea. So we must pay attention before this.
As one of the main parts of the entire hot melt glue gluing machine system, the hot melt hose is indispensable and plays a role in conveying and insulating the liquid hot melt. The hot melt hose is resistant to bending, has a low failure rate and stable performance.
