SDG630 thermofusion welding machine

Product Description

Butt welding is a connection method of welding. This welding technique has no parallels and overlaps. This process is the foundation of the piping system. It is used to weld two pipes together and weld around the seam without any overlap. Butt welding is a low-cost and reliable connection method without the use of additional components.

Butt Weld Pipe Fitting is an accessory for pipe connection. It is designed to change the pipe direction and pipe diameter, branch or end the pipe system. Then connect the pipe fittings to the piping system to transport fluids over long distances in an efficient way.

Due to the low cost of Butt Weld Pipe Fitting and the ease of manufacturing various pipe fittings, butt welded pipe fittings are usually used in the manufacturing process.

Advantage

Applied to fabricate PE PP PVDF elbow, tee, cross and Y shape (45° and 60°)

Fitting in workshop. Also used to lengthen the injection moulded fitting and make an integrated fitting.

Integrated structure. Nothing remains but to choose the different special clamps while fabricating different fitting

Removing PTEF coated heating plate with separate temperature controlling system.

Electric planning tool with safety limit switch enable to start it only when it is locked in the operation position.

Low starting pressure and high reliable seal structure.

Separate two-channel timer record times in soaking and cooling phase.

Digital pressure meter enable to control pressure accurately.

Linear guide ways are equipped with eating plate, planning tool and dragging plate.

Products comply with 98/37/EC and 73/23/EEC standards.

Technical specifications

Ranges of tee: 315mm－630mm

(315mm-355mm-400mm-450mm-500mm-560mm-630mm)

Ranges of cross: 315mm－630mm

(315mm-355mm-400mm-450mm-500mm-560mm-630mm)

Ranges of elbow(n×11.25°): 315mm－630mm

(315mm-355mm-400mm-450mm-500mm-560mm-630mm)

Ranges of application: PE,PP and PVDF

Working voltage: ～380V ±10%,50Hz

Total power: 29 kW , including: planing tool motor: 4 kW, heating plate: 22 kW, hydraulic unit motor: 3 kW

PTFE coated heating plate, high accuracy temperature controller, difference in heating plate surface temperature ≤±5°; PLC control system;

Environment temperature: －10° ～ 45°

Electronic count-down timer for heating and cooling time.

Whole machine consists of four parts: basic frame ( including: heating plate, planing tool, and hydraulic system), elbow clamps, tee clamps, and cross clamps