Product Description
Pe Pipe Socket Fusion Welding Machine is a device specially used for polyethylene (PE) pipe joining. It uses hot melt technology to heat both ends of the PE pipe to a molten state, and then quickly butt them together to allow them to cool and form a strong connection.

Product composition
1. Control system: used to control parameters such as temperature, time and pressure. Through the control system, the operator can adjust the working mode of the welding machine and ensure the accuracy and consistency of the welding process.
2. Heating plates: located on both sides of the welding machine, used to heat the ends of PE pipes. The heating plate is usually made of high-temperature wear-resistant material and can provide enough heat to bring the PE pipe to a molten state.
3. Clamping device: used to hold both ends of the PE pipe in the correct position and apply appropriate pressure during the welding process. Clamping devices are usually driven by hydraulic systems to ensure even distribution of clamping force.
4. Control panel: Located on the operation panel of the welding machine, it is used to set and monitor welding parameters. Operators can adjust parameters such as welding temperature, time and pressure through the control panel to meet different pipeline specifications and welding requirements.

Technical parameter

Type		SDG800
Materials for welding		PE、 PP 、PVDF
Max. range of pipe outside diameter		800mm
Environment temperature		-5～45℃
Power supply		380,50Hz
Total power		47.28Kw
Total current		50A
Max. hydraulic pressure		80 kgf/cm2
Total section of cylinders		33.15 cm2/3115 mm2
Hydraulic oil		40～50（kinematic viscosity）mm2/s, 40℃
Oil tank capacity		40 L
Max. temperature of heating plate		＜270℃
Difference in surface temperature of heating plate		≤±7℃
Body	Net Size，L×W×H，mm	3900×2800×1900
controller	Net Size，L×W×H，mm	355×550×1550
Electric box	Net Size，L×W×H，mm	650×420×1260

Working principle
When welding with the Pe Pipe Socket Fusion Welding Machine, first clean and cut both ends of the PE pipe to the correct length. Then, place the end of the pipe on a hot plate and allow it to heat to a molten state. Once the proper temperature is reached, the pipes are quickly butted together and pressure is maintained to allow them to cool and form a strong connection. The entire welding process usually only takes a few minutes.

Advantage
One of the main advantages of using the Pe Pipe Socket Fusion Welding Machine is its efficiency. It safely welds fittings and pipes in seconds, ensuring minimal project completion time. Additionally, the machine eliminates the need for solvents or adhesives that can create messes and pose a health hazard to the operator.
Furthermore, the Pe Pipe Socket Fusion Welding Machine is easy to operate thanks to its user-friendly controls and simple procedures. Operators require minimal training to use the machine effectively, reducing the chance of errors or accidents.

Application

Pe Pipe Socket Fusion Welding Machine is widely used in pipe connections in water supply, gas, chemical industry, drainage and other fields, and is especially suitable for the installation and maintenance of PE pipe systems.

450