1. The automatic electric fusion welding machine is more suitable for the welding of various plastic pipes and fittings in new construction and reconstruction projects. Under normal circumstances, operators need to pass professional technical training before they can operate the equipment.
2. Only the fully-automatic electric fusion welding machine that has been maintained, inspected and calibrated can be used. When using it, remember to wear heat-resistant gloves and correct eye protection equipment. Pay attention to the surrounding conditions of the operation to avoid equipment damage.
3. The power supply connected to the fully automatic electric fusion welding machine must meet a requirement of the equipment. After confirming that the cable and power supply meet the requirements of the equipment, it can be powered on for official use.
4. The package of the electrofusion pipe fittings can only be unpacked when they are to be operated. Before electrofusion, a special scraper should be used to properly scrape the surface. The tail of the pipe should be cut to a right angle with a pipe cutter, and then fixed. Improper use will cause welding failure.
