1. The welding parameter data of the automatic hot-melt welding machine is modularized, and the welding specifications are stored in the host system in advance through the host module.
2. The operation of the automatic hot melt welding machine is simplified. The operator only needs to input the pipe material, pipe outer diameter, SDR value and other parameters from the host system to call out the welding parameters corresponding to the welding specification from the system, thereby allowing The host executes welding parameters for welding, which reduces the deviation of manual operation on welding parameter control.
3. The automatic hot plate ejection of the automatic hot melt welding machine. Because the automatic hot melt welding machine has an automatic ejection device for the hot plate, when the welding is carried out to the T3 stage, the hot plate will automatically pop up when the welding is separated after the end of heat absorption. (It is no longer necessary to manually take the hot plate) and automatically close to weld the pipe. The whole process is shorter and more scientific than manual operation.
4. The automatic timing of the welding and cooling stage of the automatic hot melt welding machine is automatic. When the welding enters the welding and cooling stage, the system automatically counts down, and the whole welding process is under welding monitoring from the time the hot plate is put in. The quality of welding is judged by the host computer, thereby reducing human interference.
5. The automatic hot melt welding machine realizes the traceability of information such as operators, pipe manufacturers, pipe materials, construction date and time, construction sites and other information.
