Knowledge

1. Fully automatic electric fusion welding machine is more suitable for welding various plastic pipes and fittings in new construction and reconstruction projects. Under normal cir

1. After the preparation work is over, turn on the operating switch, carefully adjust the working current and start welding. 2. For any reason, when the electric welding machine st

1. The best welding (welding) parameters for pipes of different calibers, SDR and materials have been set in advance (select caliber, material, serial number). 2. The welding machi

During the use of the PE pipe welding machine, improper operation, environmental changes, etc. may affect the quality of the electrofusion interface. Only by avoiding these factors

1. Heating plate The maximum temperature of the heating plate can reach 250℃, so the following items must be paid attention to: ①Wear protective gloves ② Pay attention to the safet

1. Fully automatic electrofusion welding machine is more suitable for welding various plastic pipes and fittings in new construction and reconstruction projects. Under normal circu

The oxide layer must be removed, and the pipe inserted into the pipe fitting should be loose and tight. Generally, it is better to be easily inserted. During welding, the embedded

1. The welding parameter data of the automatic hot-melt welding machine is modularized, and the welding specifications are stored in the host system in advance through the host mod

In the electric fusion connection method, the oxide scale in the welding area must be removed; at least the oxide scale in the pipe welding area must be removed when the electric f