I. Cleaning Steps
Power Off Preparation: First, turn off the power and unplug the machine to ensure safety.
Surface Cleaning: Wipe the outer casing and connecting wires with a soft cloth. Use an alcohol-soaked cotton cloth to wipe away dust and oil.
Heating Plate Treatment: Scrape off any residue with a wooden tool. Wipe away oil with an alcohol-soaked cotton cloth.
Internal Cleaning: Open the machine casing and clean the circuit boards and sensors with a soft brush and alcohol.
Hydraulic System: Check the oil lines. Replace seals if there are leaks. Replace the oil if it is dirty.
II. Precautions
Tool Selection: Use only wooden tools to clean the heating plate to avoid scratching.
Cleaning Agent: Alcohol-soaked cotton cloths are the safest option. Do not use corrosive liquids.
Regular Inspection: Perform a thorough cleaning once a month, focusing on the heating plate and hydraulic system.
III. Safety Tips
Protective Equipment: Wear gloves and safety goggles when operating the machine.
Environmental Requirements: Keep the machine dry and prevent water from entering. Emergency handling: If leakage or overheating is detected, immediately stop the machine and check.
