Product Description

Plastic Pipe Semi Automatic Welding Machine is a semi-automatic welding equipment used for plastic pipe welding. It uses advanced technology and design to improve welding efficiency and quality.

20220810141946b3be53c3132b4dd4a6b94ceb50c61734_wps

Note:

(1) The electric heating plate plug should be connected to the electric box before the machine is powered on. It is strictly forbidden to connect the electric heating plate plug to the electric box after the machine is powered on;
(2) The sectional area of the power supply line of the machine shall not be less than 1.5mm2 copper core wire;The surface temperature of electric heating plate should be higher than 200 ℃;

Product composition
This equipment usually consists of a welding machine and a control system. Welding machines usually have a heating element that heats both ends of the pipe for welding. The control system can adjust welding parameters such as temperature and time as needed.

Working principle
When welding using this equipment, first put both ends of the plastic pipe into the welding machine and heat it to the required temperature. The two heated pipe ends are then aligned and pressed together so that they melt and form a strong welded joint. The entire process can be monitored and adjusted through the control system.

Advantage
First, it can improve the efficiency of welding because it can quickly heat the pipe and automate the welding process.
Secondly, it can provide more consistent and stable welding quality because of its ability to precisely control welding parameters.
In addition, using this equipment for welding can also reduce the risk and labor intensity of manual operations.

Technology parameter

Type	SDD450
Materials	PE, PP, PVDF
Max. range of diameter	450 mm
Environment Temperature	－5~45℃
Power Supply	～380 V±10％
Frequency	50 Hz
Total current	22.1A
Total power	8.38kW
Include ： Heating Plate	5.38 kW
Facing tool Motor	1.5 kW IP54
Hydraulic Unit Motor	1.5 kW IP54
Dielectric resistance	>1MΩ
Undesired sound	＜70 dB
Max. Pressure	8 MPa
Total section of cylinders	22.37cm2
Volume of oil box	3L
Hydraulic oil	40～50(kinematic viscosity)mm2/s, 40℃)
Max. Temp. of Heating Plate	270℃
Difference in surface temperature of heating plate	±5℃
Total weight,kg	394

When our SDD450 tube welders water poly pipe welding machine butt fusion welding machines hydraulic welds pipe together with data logger, the welding process is in a semi-automatic way, continuous repeat of the welding cycles and automatic control of preset parameters. Data Logger can store up to 1000 welding cycles and sum them into a encrypted EXCEL file. This report can be transferred to a PC/Laptop through a USB port.

product-686-743