Product Description
Hydraulic Power PE Pipe Butt Fusion Welding Machine is a device specially used for connecting polyethylene (PE) pipes, usually used in pipeline engineering, municipal engineering, gas pipelines, water treatment and other fields. This equipment uses hydraulic power to weld pipes, ensuring a strong connection and a good seal.

application111

Work steps
First, clean and cut the ends of the PE pipes to be connected into flat surfaces; then place both ends of the pipes on the heating plate, start the equipment to heat the pipes until softened; then align the two ends and apply a certain amount of pressure to weld the pipes together; finally cooling the pipes and removing excess material, completing the welding process.

Advantage

Removable PTFE coated heating plate with separate temperature control system.

Electrical planning tool;

Be made of lightweight and high strength material; simple structure, small and delicate user friendly;

Low starting pressure ensures reliable welding quality of small pipes;

Separate two-channel timer shows time in soaking and cooling phases;

High-accurate and shockproof pressure meter in indicates clear readings.

450

Product Specifications

Type	SDD630
Materials	PE, PP, PVDF
Max. range of diameter	630 mm
Environment Temperature	－5~45℃
Power Supply	～380 V±10％
Frequency	50 Hz
Total current	32.5 A
Total power	13.1kW
Include ： Heating Plate	9.35 kW
Facing tool Motor	1.5 kW IP54
Hydraulic Unit Motor	1.5 kW IP54
Crane	0.75KW
Dielectric resistance	>1MΩ
Undesired sound	＜70 dB
Max. Pressure	8 MPa
Total section of cylinders	23.06cm2
Volume of oil box	3L
Hydraulic oil	40～50(kinematic viscosity)mm2/s, 40℃)
Undesired sound	＜70 dB
Max. Temp. of Heating Plate	270℃
Difference in surface temperature of heating plate	±5℃
Basic frame	Size,mm	1570×900×930
	Weight,kg	500
Hydraulic unit	Size,mm	700×520×490
	Weight,kg	65
Planing tool	Size,mm	840×280×1300
	Weight,kg	60
Heating plate	Size,mm	990×70×960
	Weight,kg	36
Supports	Size,mm	800×650×770
	Weight,kg	36
Total weight,kg	697