The product models and parameters produced by each manufacturer are different. Therefore, when choosing a pipe fitting hot-melt welding machine, you should choose a new automatic pipe fitting hot-melt welding machine that supports manual and barcode dual-use, otherwise you can choose other products that will be useful in the process of use. Reduce, thereby reducing the efficiency of use, causing unnecessary waste,
During construction, 2.5mm² input cable is generally required when the power source is within 50 meters from the welding machine. By analogy, the longer the distance, the greater the cable voltage used. When the grid voltage does not meet the requirements, this time must be selected. Generator to support power supply. There are strict requirements when using the pipe fitting hot-melt welding machine. It must be used by professionals and certified personnel. Non-professionals should not approach it to avoid unnecessary danger to the operator.
The control box of the pipe fitting hot-melt welding machine is connected with a pressure sensor and a temperature probe, which can control and adjust the temperature of the heating plate. It can also control the preheating phase, heat absorption phase, conversion phase, welding phase, and cooling phase during the welding process. Time parameters. During work, different pressures and maintenance times are allowed to be set and recorded at each stage. Each work cycle can be automatically recorded and repeated operations. A new set of welding parameters is selected. If the actual parameters are out of tolerance, an alarm will appear.
The automatic pipe fitting hot-melt welding machine can achieve consistent, reliable and repeatable operation; the system will control, monitor and record the main parameters of each stage of the welding process to judge the status of each weld; the welding machine has a data retrieval and storage device and The data download interface can store and download welding data; after milling the pipe end face, it can automatically check whether the pipe is clamped firmly; automatically measure the dragging pressure and automatically compensate for the dragging force.
Automatically monitor the temperature of the hot plate according to the selected parameters. Only when the temperature of the hot plate is within the set working temperature range, the welding machine can perform welding; The pressure drops to drag pressure, heat absorption pressure and time, switching: frame opening/hot plate extraction/frame closing, pressurization, pressure retention, cooling) are automatically performed; the microprocessor adopts a closed-loop control system.
