Knowledge

workshop welder The workshop welding machine can produce the elbow, tee, cross by PE pipe at workshop. The standard clamps conform to the standard pipes’ sizes according with ISO16

hydraulic butt fusion welding machine Whole machine consists of basic frame, heating plate, planning tool, hydraulic unit and support (for planning tool & heating plate)

The machine is formed of basic frame, hydraulic unit, heating plate, facing tool, the recorder, support, lifter and recorder. The machine is formed of basic frame, hydraulic unit,

1. Fully automatic electrofusion welding machine is more suitable for welding various plastic pipes and fittings in new construction and reconstruction projects. Under normal circu

Precautions: 1. It is strictly forbidden to connect the Electrofusion welding machine to 380V power supply, otherwise the equipment will be burnt down! 2. Before the Electrofusion

The automatic electrofusion welding machine is mainly used for welding various plastic pipes and fittings in new construction and reconstruction projects. To avoid the risk of scal

The first is that there is no power when connected to the power supply. It is the problem of the fuse burned out or the power interface. We need to replace the accessories or recon

1. Prepare the electric fusion welding machine, the PE pipes and fittings that need to be welded. 2. Remove the oxide layer on the insertion end of the PE pipe and insert it into t

1. When we use the fully automatic Electrofusion welding machine, turn on the power, and the screen will display "Welcome to use the welding machine" after turning it on.