🔧 I. Preparation before calibration Environmental requirements: Place the equipment in an indoor environment of (23±5)℃ and humidity ≤85% for 2 hours to avoid the influe
I. Structural Durability: Is there irreversible deformation or fatigue damage? Structural components are the "skeleton" of the equipment. Plastic deformation or cracks wi
I. Improve structural durability: Reduce metal fatigue and ensure rigidity and stability. The machine frame and guide rails are subjected to high-load forging forces over long peri
I. Judging Incomplete Welding by the "Double Eyelid" Edge The "double eyelid" is a double-ringed edge formed by the even overflow of molten material, a sign of
I. Thoroughly clean the cooling system to restore heat conduction efficiency 1. Blow away internal dust: Use dry compressed air to thoroughly clean the cooling fan, ventilation hol
I. Ensure adequate cooling (prerequisite for restarting) Natural cooling time should be at least 30 minutes to ensure the temperature of internal core components (such as transform
I. Immediate shutdown: Cut off the source of risk Immediately turn off the power switch and disconnect the input cable to ensure the equipment is completely powered off. If welding
I. Core Consequences: From Equipment Damage to Safety Accidents 1. Permanent Damage to Key Electronic Components: Overheating can cause core components such as the rectifier bridge
I. Ensure Good Heat Dissipation and Control Temperature from the Source 1. Maintain Good Ventilation: The electrofusion welding machine should be placed in a well-ventilated, dry,