Knowledge

1. The automatic electric fusion welding machine is more suitable for the welding of various plastic pipes and fittings in new construction and reconstruction projects. Under norma

1. E-fusion welding machine transportation convenience Since the electric fusion welding machine is mainly used for on-site construction, it must be moved around. Of course, the li

In the installation of a pipe network project, the welding method of PE pipe hot-melt welding machine is applied. The diameter of the main water supply pipe is greater than 63mm an

In the process of hot melt welding of PE pipes, it is necessary to comprehensively control its quality, carry out management work for operators, mechanical equipment, welding mater

1. Prepare electric fusion welding machine, PE pipes and fittings that need to be welded. 2. Remove the oxide layer on the pierced end of the PE pipe and then pierce it into the el

The automatic electric fusion welding machine is mainly used for welding various plastic pipes and fittings in new construction and reconstruction projects. To avoid the risk of sc

First of all, let's take a look at the first problem of the electric fusion welding machine. It is not powered on when it is connected to the power supply. Why is it not powere

(1) After the polyethylene pipe is welded with the PE hot melt machine, the third-party acceptance should be strengthened, and a certain proportion of the interface should be appro

1. Preparation for welding. The preparations for hot melt welding are as follows: ① Put the slips consistent with the pipe specifications into the rack; ② Prepare enough supports t