Knowledge

Butt Welding Machine to the Operator Two sizes of new Butt Welding machines shall be supplied to the contract that will remain with the Employer after completion of the works, name

If planing tool of pipe welding machine does not rotate , how to fix? Problem: The limit switch is ineffective or the mechanical parts of planing tool are clipped. Solution:Replace

How to adjust the deviation between heating plate and temperature controller 1. When temperature controller is stable, it reads 220 degrees 2. Test the heating plate, and the avera

pe pipe butt fusion machine welding standard Because of difference in welding standard and PE material, the time and pressure vary in different phases of welding. It suggests that

Maintenance & Inspection

Heating plate operation for butt welding machine hdpe pipes Clear the dust or slit on the surface of heating plate (Caution: Don’t damage PTFE layer on the surface of heating plate

Planing Open the pipes/fittings ends after turning swing check valve anti-clockwise to the end. Put the planning tool between the pipes/fittings ends and switch it on, close the pi

Adjust the pressure Open fully the pressure regulation valve completely, lock the swing check valve tightly and then push forward the direction valve meanwhile adjust the pressure

Welding quality Malfunctions Analyzing and Solutions