Since the fully automatic electric fusion welding machine is mainly used for on-site construction and must be moved around, of course, the lighter the weight, the better. Generally, the weight of imported phase-controlled electrofusion welding machines is more than 17KG, many domestic welding machines are between 20-40KG, and the inverter type electrofusion welding machine is only about 10KG. Therefore, many customers have difficulty choosing among them. In fact, the operation convenience of the fully automatic electric fusion welding machine is not as good as that of the inverter electric fusion welding machine in terms of transportation convenience, but from the convenience point of view, you only need to consider two points:
a) Full Chinese menu
On-site operators are generally not very familiar with English. Imported welding machines all have English interfaces, which is difficult for an ordinary operator. Therefore, from the perspective of convenience for on-site operators, an electric fusion welding machine with a full Chinese menu should be recommended.
b) The simpler the operation, the better
As mentioned above, on-site operators not only have difficulty in English, but also in operating complex computer systems. If the operating procedures of the electric fusion welding machine are too complicated, it will also be a headache for them. In this sense, a fully automatic electric fusion welding machine that is easy to operate should be recommended.
