The fully automatic Electrofusion welding machine is mainly used for welding various plastic pipes and fittings in new construction and reconstruction projects. To avoid the danger of scalding during the welding process, the operator must pass the professional operation training and be qualified to operate the Electrofusion welding machine.
The daily maintenance of Electrofusion welding machines cannot be ignored, and must also be carefully checked and calibrated before use. Clean up the surrounding environment of Electrofusion welding machine to avoid equipment damage. In addition, heat-resistant gloves and eye protection are properly worn when working.
Check cables and mains voltage. The power supply connected to the fully automatic Electrofusion welding machine must meet the requirements of the equipment. After repeated confirmation, it can be powered on for official use.
Electrofusion fittings shall not be disassembled in advance. Only in the official operation, the package can be opened. Before electrofusion, make sure the surface of the fitting is flat. It can be properly scraped with a professional scraper. The ends of the pipe fittings need to be cut to right angles with a pipe cutter and secured. Improper use may cause welding failure.
