Nowadays, people always use welding machines when welding products, and most of them use butt welding machines. When we are using it, as long as we pay attention to some matters, it can extend its service life to a certain extent, so that it can be used for a longer time.
When we use it, we need to keep the welding electrode and annealing electrode clean. Frequently use a brush or soft cloth to clean and remove the oil and carbon deposits on the electrode surface and grooves, so that the electrode maintains good conductivity. After each welding, the metal splash and dust should be removed in time to ensure that the welding can work normally. Especially the electrode, which is related to the conductivity of steel wire welding, should not have dust and carbon deposits. The butt welder mechanism is a precise mechanical device, any excessive external force will affect the welding performance of the butt welder, so take care of it during use.
Doing a good job of lubricating sliding parts is the key to prolonging the service life of the butt welding machine. The movement pair of the steel butt welding mechanism adopts manual lubrication on a regular basis. For the lubrication parts, refer to the lubrication method table of the steel butt welding machine.
Generally speaking, when we use it, we need to adjust the distance between the two jaws. When adjusting, we need to turn the adjusting screw to make the joystick so that it is at the left limit. The jaw distance should be the total extension of the two weldments. The difference between the length and the amount of extrusion. When the joystick is at the right limit, the distance between the jaws should be the total extension length of the two weldments plus 2~3mm, which is the original position before welding.
