Full Automatic Welded Pipe Machine welding preparation work

1. Pipe cutting and groove processing
Use high-precision cutting equipment to cut the pipe to the required length and process the groove according to the design requirements. The groove form is [specific groove form], the groove angle is [angle value], and the blunt edge size is [size value].
2. Pipe surface cleaning
Use mechanical grinding or chemical cleaning to remove impurities such as oil, rust, and scale on the surface of the pipe until the metallic luster is exposed. The cleaned pipe should be welded within [specified time] to prevent re-oxidation.
3. Equipment inspection and debugging
Check whether the various components of the Full Automatic Welded Pipe Machine are operating normally, including welding power supply, control system, transmission system, cooling system, etc.
Pre-set and debug welding parameters, such as welding current, voltage, welding speed, shielding gas flow, etc., to ensure that the equipment is in the best working condition.