1. Welding process: gas shielded welding is adopted, the workpiece is rotated, and the torch swings for multilayer welding;
2. Unique pause function, welding at any time. Stop anytime
3. Welding position requirements: clamping and operation in a horizontal position;
4. Special machine structure: The welding machine is tailor-welded by carbon steel, which is firm and stable. Both ends of the equipment are equipped with active machine purchase and pneumatic tailstock, the nose is fixed, and the tailstock can be adjusted in movement;
5. Active head: The workpiece rotation is driven by a frequency conversion motor + reducer + three jaws, with stable movement and stepless speed regulation; the entire tailstock is guided by rails (suitable for different length cylinders);
6. Tailstock: the top tight part adopts pneumatic top;
7. Welding torch moving mechanism: air pressure is used to control the lifting of the welding torch, and the motor swing welding torch has an automatic lifting distance between layers that can be set; the left and right swing amplitude of the welding torch is adjustable, which can be set according to the needs of production;
8. Bracket mechanism: When the diameter of the workpiece is different by adjusting the opening of the roller frame, the center is still consistent with the center of rotation;
9. Protective door and box body: A movable sliding door is installed in the front, equipped with welding protective glass, which is used to observe the welding situation and protect the human body from arc radiation and welding spatter. It is integrated with the door and the equipment has a beautiful appearance;
10. Air pressure control system: top telescopic, system design conforms to relevant national standards;
11. Electrical control system: A programmable controller (PLC) is used as the main control unit, the output point is protected by an intermediate relay, and the Chinese display touch screen is used as the parameter adjustment dialogue interface. The touch screen can set the welding voltage and current of each layer, and can set the welding speed and swing speed of each layer. It has the automatic lifting function of the welding gun, manual and automatic functions, etc.;
12. The adjustment of fully digital welding specifications can be realized on the console, which can be set, the welding speed is steplessly adjusted, the numerical value is displayed, and the welding circle number is preset;
13. Separately set up electrical control cabinets and operation boxes, and use standard cable tank chains to run cables, air pipes, etc.;
14. Protection device: If an abnormal condition occurs in the equipment, the equipment will automatically stop and remain stationary, and the call will be restored;
